๐จ Read Before Buying
These are TRUE 60mm bases - exactly 60mm diameter.
Most "60mm bases" sold online (including GW) are actually 63mm. Our TRUE 60mm are 3mm smaller and will NOT fit:
- Movement trays designed for 63mm
- Base toppers/inserts for "60mm" (actually 63mm)
- Existing GW-standard armies
โ ๏ธ Need GW-compatible 63mm? These are NOT for you.
๐ Specifications
| Size: | TRUE 60mm diameter (not 63mm) |
| System: | Open Basing System (OBS) |
| Material: | PETG (strong, flexible, paintable) |
| Method: | FDM 3D Printed |
| Colour: | Black |
๐ 60mm vs 63mm Comparison
| TRUE 60mm | GW "60mm" (63mm) | |
|---|---|---|
| Actual size | 60.0mm | 63.0mm |
| GW compatible | โ No | โ Yes |
| Mathematically correct | โ Yes | โ No |
| Best for | Scale accuracy | GW games |
๐ Open Basing System (OBS)
GW calls them "60mm" but they're 63mm. The industry followed. We made actual 60mm for hobbyists who need real dimensions - not "close enough."
Your models. Your army. Your choice.
๐ฏ Who Needs TRUE 60mm?
๐ก If you're designing custom movement trays or laser-cut MDF with metric dimensions - these will actually fit a 60mm hole.
๐งช Why PETG?
Impact resistant
Won't warp
Primer & paint
CA & plastic cement
โ ๏ธ About FDM Printing
Seams: FDM prints have a visible "Z-seam" - a thin vertical line on the base edge. This is not a defect, it's normal.
Layer lines: Subtle horizontal lines may be visible. These largely disappear after priming.
๐ก For glass-smooth display pieces, resin might suit you better. For gaming, these work brilliantly.
๐ ๏ธ Prep Tips
- Wash with soap & water before priming
- Prime with Vallejo, Army Painter, or Citadel spray
- Sand with 400-600 grit if ultra-smooth needed
- Base with texture paste, sand, tufts - all adhere well
โ FAQ
Will these fit GW movement trays?
No. GW trays are for 63mm. These will be loose. If you need GW compatibility, these are not for you.
Why do GW bases say "60mm" if they're 63mm?
GW always called them 60mm, the industry followed. The actual measurement is 63mm. We call ours "TRUE 60mm" to be clear.
Do you sell 63mm (GW standard) too?
Yes! Check our shop for the full OBS range including 63mm GW-compatible bases.
Do I need to prime them?
Highly recommended. Acrylic paint on unprimed PETG can scratch off.
โจ Hobby Heaven UK โข Check our shop for more OBS sizes โจ
